F6 Installation Method for Intel® Rapid Storage Technology

Documentation

Install & Setup

000005611

10/02/2017

The F6 installation method allows you to install a third-party mass storage driver during Windows* setup. The chart below shows the circumstances in which you must use the F6 installation method during an operating system installation.

Operating system Total drive volume F6 installation method
Windows 8* Any size Recommended but not required1
Windows 7*, Windows Vista* Less than 2 terabytes Recommended but not required1
More than 2 terabytes2 Required
Windows XP*, Windows Server 2003* Less than 2 terabytes Required
More than 2 terabytes2 Required
 

1 Windows 7 and Windows Vista both include drivers for RAID/AHCI during installation.
2 For Intel® Desktop Boards, you must first enable UEFI in the BIOS when using total drive volume greater than 2 terabytes. For non-Intel motherboards, refer to the motherboard documentation to verify this requirement.

General information

Troubleshooting

Related topic
Microsoft Knowledge Base article: Limited original equipment manufacturer (OEM) driver support is available with F6...