Article ID: 000086725 Content Type: Troubleshooting Last Reviewed: 11/08/2021

Why a partial reconfiguration operation fails after a successful partial reconfiguration operation on the Intel® Stratix® 10 devices?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition Software v18.1 Update 2 and v19.1, when performing partial reconfiguration operations, one after another, you may find occasional failures. The unsuccessful partial reconfiguration operations will assert the PR_ERROR signal.

    Resolution

    A patch is available to fix this problem for the Intel® Quartus® Prime Pro Edition Software v18.1 Update 2 and 19.1. Download and install Patch 2.06, 2.06p, 0.14fw, or 0.14fwp from the appropriate link below.

    Intel® Quartus® Prime Pro Edition Software v8.1 Update 2


    Intel® Quartus® Prime Pro Edition Software Programmer and Tools v18.1 Update 2


    Intel® Quartus® Prime Pro Edition Software v19.1


    Intel® Quartus® Prime Pro Edition Software Programmer and Tools v19.1

     

    This problem has been fixed starting with the Intel® Quartus® Prime Pro Edition Software v19.2.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs