When programming your EPCS or EPCQ configuration device with the .JIC file format, the FPGA devices MSEL settings are required to be set for Active Serial (AS) or Fast Active Serial (AS) configuration scheme. You will see the "Can\'t recognize silicon ID for device <n>" error message if the MSEL settings are incorrectly set.
Device Family: Intel® Arria® 10 GT
Device Family: Intel® Arria® 10 GX
Device Family: Intel® Arria® 10 SX
Device Family: Arria® V GT
Device Family: Arria® V GX
Device Family: Arria® V GZ
Device Family: Arria® V ST
Device Family: Arria® V SX
Device Family: Arria® GX
Device Family: Intel® Cyclone®
Device Family: Cyclone® II
Device Family: Cyclone® III
Device Family: Cyclone® III LS
Device Family: Cyclone® IV E
Device Family: Cyclone® IV GX
Device Family: Cyclone® V E
Device Family: Cyclone® V GT
Device Family: Cyclone® V GX
Device Family: Cyclone® V SE
Device Family: Cyclone® V ST
Device Family: Cyclone® V SX
Device Family: Stratix® II
Device Family: Stratix® II GX
Device Family: Stratix® III
Device Family: Stratix® V E
Device Family: Stratix® V GS
Device Family: Stratix® V GT
Device Family: Stratix® V GX
Type: Answers
Area: Component