This error may be seen if using Intel® Quartus® Prime Programmer software versions older than 20.3 to configure an Intel® Stratix ® 10 device with a programming file generated in Intel® Quartus® Prime Pro Edition sofwtare version 20.3 (or later). This is because in Intel® Quartus® Prime Pro edition software version 20.3, a new field was added to the Power Management settings to allow control of the Page Command Payload setting. This field is only relevant for PMBus Master Mode operation.
Device Family: Intel® Stratix® 10
Intel Software: Quartus Prime Pro
Last Modified: January 05, 2021
Version Found: v20.3
Bug ID: 1308325840