Device Family: Intel® Stratix® 10

Intel Software: Quartus Prime Pro

Type: Answers

Area: Component


Last Modified: April 17, 2018
Version Found: v17.1
Bug ID: FB: 551713;

Error(18948): Error message received from device: Detected corrupted configuration data at location 0x00008400

Description

The .jic file programming flow may fail on certain SmartVID (-V) graded Intel® Stratix® 10 devices with Intel Quartus® Prime Pro programmer version 17.1 (Update 1 and Update 2). You may encounter this error message during the .jic file programming process because the helper image (Factory Default SFL image) is unable to bypass the VID check for Intel Stratix 10 devices : 

Error(18950): Device has stopped receiving configuration data 

Error(18948): Error message received from device: Detected corrupted configuration data at location 0x00008400 

Error(209012): Operation failed

 

Workaround/Fix

To work around this follow the steps below:

1. Configure the Intel Stratix 10 device over JTAG with a user design .sof file.
2. Load the .jic file into the Intel Quartus Prime Pro programmer, turn on the “Program/Configure” check box only at the child level .jic file. In this case the programmer will program the .jic file directly into the  flash device without configuring the Factory Default SFL image into the FPGA.

This problem is scheduled to be fixed in a future release of the Intel Quartus Prime Pro software.