Device Family: Intel® Stratix® 10

Intel Software: Quartus Prime Pro

Type: Answers

Area: Component

Last Modified: May 21, 2018
Bug ID: FB: 462163;

Error(19192): File .sof is incomplete - Power management settings are not set up appropriately on VID part


You may see this error when compiling a design targetting -V (SmartVID) enabled Intel® Stratix® 10 devices in the Intel Quartus® Prime Pro software if you have not assigned the SmartVID power management signals to SDM_IO and/or have not appropriately configured the Power Managment & VID section in your project.


In the Intel Quartus Prime Pro software, you must assign the SmartVID power management signals to appropriate SDM_IO pins under Assignments -> Device -> Device & Pin Options -> Configuration -> Configuraion Pin Options. In addition, when operating in PMBus Master/Slave mode, you must assign a non-zero address to device address under Assignments -> Device -> Device & Pin Options -> Power Managment & VID.