Article ID: 000076444 Content Type: Install & Setup Last Reviewed: 02/13/2023

Error (suppressible): (vopt-2732) ../simulation/submodules/gcp_infra_intel_generic_serial_flash_interface_top_0_qspi_inf_inst.sv(860): Module parameter 'ENABLE_SIM_MODEL' not found for override.

Environment

  • Intel® Quartus® Prime Standard Edition
  • Generic Serial Flash Interface Intel® FPGA IP
    • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Standard Edition Software version 18.1, the simulation model for the Generic Serial Flash Interface Intel® FPGA IP is generated incorrectly and produces this error when executing a simulation.

    Resolution

    To work around this problem, download and install the following patch file for your operating system:

    This problem is fixed starting with the Intel® Quartus® Prime Standard Edition Software version 20.1

    Related Products

    This article applies to 1 products

    Intel® Cyclone® 10 FPGAs

    Need more help?

    Contact support

    Disclaimer

    1

    All postings and use of the content on this site are subject to Intel.com Terms of Use.