MAX+PLUS II Version 9.32 Update Installation Instructions

Warning

All MAX+PLUS II software (including MAX+PLUS® II BASELINE Edition Version 10.2 & Student Edition Version 10.2, and MAX+PLUS II Software Updates versions 10.23 through 8.21) will no longer be available after 3/12/2021. MAX+PLUS II software does not include the latest functional and security updates and will not be supported. All versions are provided as is. Intel recommends that users of MAX+PLUS II software uninstall and discontinue use as soon as possible. Users should upgrade to the latest available software version for their device and follow the technical recommendations to help improve security.

PC Instructions

  1. Make sure that MAX+PLUS® II version 9.3 or 9.31 is installed; the update files are not compatible with any other MAX+PLUS II version.

  2. Make sure that the MAX+PLUS II software is not running.

  3. Begin installation by executing the 932_pc.exe file, i.e., type the following command at a DOS or command prompt:

    <drive letter><path>932_pc Enter

    or

    Double-click the file name in the Windows Explorer (Windows 95/98) or Windows NT Explorer (Windows NT 4.0).

  4. The WinZip Self-Extractor [932_PC.EXE] dialog box appears. By default, the WinZip software extracts the files into the directory c:\maxplus2. If your version of MAX+PLUS II software is located in a different directory, type the directory name in the Unzip to Folder field. Click the Unzip button to unzip the files. The update files replace the previous version of the files in the MAX+PLUS II system directory.

  5. Click OK when you are informed that the files have been unzipped successfully, and click the Close button to close the WinZip Self-Extractor [932_PC.EXE] dialog box.

UNIX Instructions

  1. Make sure that MAX+PLUS II version 9.3 is installed; the update files are not compatible with any other MAX+PLUS II version.

  2. Make sure that the MAX+PLUS II software is not running.

  3. Move the 932_common.tar.Z file you downloaded to the maxplus2/common subdirectory.

  4. At a UNIX prompt, change your current directory to the maxplus2/common subdirectory and type the following commands:

    uncompress 932_common.tar.Z Enter
    tar xvf 932_common.tar Enter

    The update files replace the previous versions of the files in the maxplus2/common subdirectory.

  5. Move the platform-specific file(s) you downloaded to the subdirectory appropriate for your platform. Change to the subdirectory for your platform. The following table lists the subdirectories for each platform:

    Directory Platform
    maxplus2/solarisSolaris workstations
    maxplus2/hpHP workstations

  6. Type the following commands:

    uncompress 932_<platform>.tar.Z Enter
    tar xvf 932_<platform>.tar Enter

    The update files replace the previous versions of the files in the subdirectory.

  7. Create three symbolic links by typing the following commands:

      ln -s ../common/p200208.ddf p200208.ddf Enter
      ln -s ../common/p200240.ddf p200240.ddf Enter
      ln -s ../common/p200.pcf p200.pcf Enter
Rate This Page