MAX+PLUS II Version 10.01 Update Installation Instructions

Warning

All MAX+PLUS II software (including MAX+PLUS® II BASELINE Edition Version 10.2 & Student Edition Version 10.2, and MAX+PLUS II Software Updates versions 10.23 through 8.21) will no longer be available after 3/12/2021. MAX+PLUS II software does not include the latest functional and security updates and will not be supported. All versions are provided as is. Intel recommends that users of MAX+PLUS II software uninstall and discontinue use as soon as possible. Users should upgrade to the latest available software version for their device and follow the technical recommendations to help improve security.

PC Instructions

  1. Make sure that the MAX+PLUS® II, MAX+PLUS II BASELINE, or E+MAXTM software version 10.0 is installed; the update files are not compatible with any other MAX+PLUS II version.

  2. Make sure that the MAX+PLUS II software is not running.

  3. Begin installation by executing the 1001_pc.exe file, i.e., type the following command at a DOS or command prompt:

    <drive letter><path>1001_pc Enter

    or

    Double-click the file name in the Windows Explorer (Windows 98/2000) or Windows NT Explorer (Windows NT 4.0).

  4. The 1-Zip Self-Installer dialog box appears. By default, the 1-Zip software extracts the files into the directory c:\maxplus2. If your version of MAX+PLUS II software is located in a different directory, type the directory name in the Expand to field. Click the OK button to unzip the files. The update files replace the previous version of the files in the MAX+PLUS II system directory.

  5. (Optional) Delete the 1001_pc.exe file now that the upgrade is finished.

UNIX Instructions

  1. Make sure that MAX+PLUS II version 10.0 is installed; the update files are not compatible with any other MAX+PLUS II version.

  2. Make sure that the MAX+PLUS II software is not running.

  3. Move the 1001_common.tar.Z file you downloaded to the maxplus2/common subdirectory.

  4. At a UNIX prompt, change your current directory to the maxplus2/common subdirectory and type the following commands:

    uncompress 1001_common.tar.Z Enter
    tar xvf 1001_common.tar Enter

    The update files replace the previous versions of the files in the subdirectory.

  5. (Optional) Delete the 1001_common.tar.Z file now that the upgrade is finished.
Rate This Page