All MAX+PLUS II software (including MAX+PLUS® II BASELINE Edition Version 10.2 & Student Edition Version 10.2, and MAX+PLUS II Software Updates versions 10.23 through 8.21) will no longer be available after 3/12/2021. MAX+PLUS II software does not include the latest functional and security updates and will not be supported. All versions are provided as is. Intel recommends that users of MAX+PLUS II software uninstall and discontinue use as soon as possible. Users should upgrade to the latest available software version for their device and follow the technical recommendations to help improve security.
This update can only be used with MAX+PLUS II version 9.3. Do not use this update with any other version. You should download and install this update if you wish to add the following support to MAX+PLUS II version 9.3.
Fixes an internal error that may occur while creating JamTM files for multiple EPC2 devices
Improves timing-driven compilation results when the fast I/O option is set
Fixes incorrect Verilog HDL synthesis of inequality comparison
Provides updated PLL frequency ranges for FLEX® 10KE and FLEX 10KS devices
Supports new speed grades for the MAX® 3000A device family (EPM3064A-4 and EPM3128A-5, all packages)
Fixes an internal error when generating Serial Vector Format (SVF) Files (.svf) or Jam Files (.jam) for EPM7256AFC256
Fixes an internal error when when recompiling designs previously compiled in MAX+PLUS II version 9.2x
Enables the use of the programmable input delay on EPF10K50S and EPF10K200S devices
Full compilation, timing, and programming support for the following FLEX 10K and FLEX 6000 devices:
Full compilation, timing, and programming support for the following PLL devices:
This update can also be used to program the following APEX 20K devices: