Fibre Channel

Fibre Channel is a high-speed robust protocol for managing the transfer of information in storage area networks (SANs). It supports data rates from 1 through 10 Gbps. At 10 Gbps, it leverages much of the technology used by Ethernet, making use of XGMII and XAUI interfaces, for example. Fibre Channel can help with design of large-scale, storage-intensive systems. It can also provide a solution that allows rapid storage and retrieval of information, while simplifying the interconnection of different components in the system. 

Figure 1. Fibre Channel Topology

Intel® (formerly Altera®) devices can implement 1, 2, 4, 8, 10 and 16 Gbps versions of Fibre Channel. The cores are highly configurable, allowing you to customize the operation of the core without engaging in a separate engineering customization project. The Intel solutions cover the FC-1 and FC-2 layers of the Fibre Channel stack.

The high-performance Arria® 10, Stratix® V (GX and GT), Stratix IV (GX and GT), Stratix II GX, and Arria II FPGAs provide the kind of performance that allows implementation of 1 and 2 Gbps Fibre Channel in lower-speed-grade devices, while still supporting leading-edge development of 4 Gbps, 8 Gbps, 10 and 16 Gigabit implementations. These devices are equipped with built-in transceivers that provide a dedicated mode for implementing the XAUI interface that is available for 10 Gigabit Fibre Channel. This allows for more efficient implementation of the entire interface in a single device. Embedded within this transceiver are dedicated rate-matching FIFO buffers, 8B/10B encoding and decoding functions, and word-alignment functions. Each group of four channels also has built-in channel alignment circuitry to minimize skew across the interface. The Stratix V GT and Stratix IV GT devices, with integrated transceivers supporting a 10 Gbps data rate, allow for implementation of the Fibre Channel over Ethernet (FCoE) protocol. Arria 10 GX / GT and Stratix V GT devices with an integrated 64B/66B encoder/decoder provide more efficient implementations of this protocol and support the 16 Gbps data rate.

MoreThanIP GmbH, an Intel FPGA Design Solutions Network partner, offers Fibre Channel intellectual property (IP) cores for Intel FPGA devices. 

Find out more about the Fibre Channel Protocol by visiting the Fibre Channel Industry Organization.

The Fibre Channel Characterization Report for Intel devices is available upon request.