start_insystem_source_probe (::quartus::insystem_source_probe)
The following table displays information for the start_insystem_source_probe Tcl command:
Tcl Package and Version |
Belongs to ::quartus::insystem_source_probe 1.0 |
|||
Syntax | start_insystem_source_probe [-h | -help] [-long_help] -device_name <device name> -hardware_name <hardware name> | |||
Arguments | -h | -help | Short help | ||
-long_help | Long help with examples and possible return values | |||
-device_name <device name> | Name of the device that holds the In-System Sources and Probes instances | |||
-hardware_name <hardware name> | Name of programming hardware connected to the JTAG chain | |||
Description |
Use this command before beginning any In-System Sources and Probes transactions |
|||
Example Usage |
#List probe data of instance 0 start_insystem_source_probe -hardware_name "USB-Blaster \[USB-0\]" -device_name "@1: EP1S25/_HARDCOPY_FPGA_PROTOTYPE (0x020030DD)" puts "probe data of instance 0" puts [read_probe_data -instance_index 0] end_insystem_source_probe |
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: The specified device is not found. | ||
TCL_ERROR | 1 | ERROR: The specified hardware is not found. | ||
TCL_ERROR | 1 | ERROR: An internal Tcl interpreter error occurred. | ||
TCL_ERROR | 1 | ERROR: JTAG communication error detected. Errors can be caused by hardware failure or poor signal integrity in the JTAG chain. | ||
TCL_ERROR | 1 | ERROR: No In-System Sources and Probes instance was found. | ||
TCL_ERROR | 1 | ERROR: There is already an active In-System Sources and Probes session started. Unable to start another session. | ||
TCL_ERROR | 1 | ERROR: The device is locked by another application. |