adjust_pll_refclk (::quartus::eco)

The following table displays information for the adjust_pll_refclk Tcl command:

Tcl Package and Version

Belongs to ::quartus::eco 1.0

Syntax adjust_pll_refclk [-h | -help] [-long_help] -refclk <refclk_freq> -to <iopll_name>
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-refclk <refclk_freq> New refclk frequency value in MHz
-to <iopll_name> Instance name of upstream IOPLL to be adjusted
The adjust_pll_refclk command can change IOPLL frequencies by modifying the input reference clock frequency.

Assumptions and Limitations:
 - The original refclk/outclk ratios will be maintained
 - None of the IOPLLs being reconfigured can generate IP clocks (the frequencies of the LVDS, PhyLite and EMIF clocks cannot change)
 - Cascaded IOPLLs must be connected directly (no clock gates in between them)
 - IOPLLs cannot be in 'nondedicated' compensation modes
 - For all IOPLL outclks duty cycle = 50 and phase shift = 0
Example Usage
    load_package eco
    adjust_pll_refclk -to "*pll_main*" -refclk 100
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful