dni::set_input_transition (::quartus::dni_sdc)

The following table displays information for the dni::set_input_transition Tcl command:

Tcl Package and Version

Belongs to ::quartus::dni_sdc 1.5

Syntax dni::set_input_transition [-h | -help] [-long_help] [-clock <name> ] [-clock_fall] [-fall] [-max] [-min] [-rise] <transition> <ports>
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-clock <name> Clock name
-clock_fall Specifies that input delay is relative to the falling edge of the clock
-fall Specifies the falling output delay at the port
-max Applies value as maximum data required time
-min Applies value as minimum data required time
-rise Specifies the rising output delay at the port
<transition> Time value
<ports> Collection or list of input or bidir ports
This constraint does not affect calculations performed by the Timing
Analyzer. It only affects PrimeTime analysis or HardCopy II devices.
If you set this constraint in the Timing Analyzer the constraint is
written out to the SDC file when you call write_sdc.
Example Usage
dni::set_input_transition 50 [all_inputs]
Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful