ID:15390 Port <name> of DSP block output WYSIWYG primitive "<name>" is connected, but OPERATION_MODE of DSP block output WYSIWYG primitive "<name>" is set to a value other than ACCUMULATOR_CHAIN_OUT or TWO_LEVEL_ADDER_CHAIN_OUT

CAUSE: The specified port of the specified DSP block output WYSIWYG primitive is connected, but the OPERATION_MODE parameter is set to a value other than ACCUMULATOR_CHAIN_OUT or TWO_LEVEL_ADDER_CHAIN_OUT. The specified DSP block output WYSIWYG primitive must have the OPERATION_MODE parameter set to ACCUMULATOR_CHAIN_OUT or TWO_LEVEL_ADDER_CHAIN_OUT.

ACTION: Disconnect the specified port of the specified WYSIWYG DSP block output primitive, or check that OPERATION_MODE parameter of the specified WYSIWYG DSP block output primitive is set to TWO_LEVEL_ADDER_CHAIN_OUT or ACCUMULATOR_CHAIN_OUT.