ID:15378 Port <name> of DSP block output WYSIWYG primitive "<name>" is not fed by a DSP block multiplier WYSIWYG primitive; all data ports of a DSP block output WYSIWYG primitive must be connected to a DSP block multiplier WYSIWYG primitive when OPERATION_MODE is set to DYNAMIC

CAUSE: The specified port of the specified DSP block output WYSIWYG primitive is not connected to a DSP block multiplier WYSIWYG primitive and is part of a DSP block slice that has the OPERATION_MODE parameter set to DYNAMIC. All data ports of the DSP block output WYSIWYG primitive must be connected to DSP block multiplier WYSIWYG primitives when OPERATION_MODE is set to DYNAMIC.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.