ID:15383 Port <name> of DSP block multiplier WYSIWYG primitive "<name>" is connected, but OPERATION_MODE of DSP block multiplier WYSIWYG primitive "<name>" is set to a value other than DYNAMIC

CAUSE: The specified port of the specified DSP block multiplier WYSIWYG primitive is connected, but the OPERATION_MODE parameter is set to a value other than DYNAMIC. The specified DSP block multiplier WYSIWYG primitive must have the OPERATION_MODE parameter set to DYNAMIC.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.