ID:261009 Cannot run Signal Tap Logic Analyzer. Signal Tap File is not compatible with the file programmed in your device. The expected compatibility checksum value is <value>; the value read from your device is <value>

CAUSE: You made a change to the Signal Tap File (.stp) that requires recompilation, and then attempted to run the Signal Tap Logic Analyzer, but you did not recompile your design. As a result, the Quartus Prime software cannot capture data on your current design. A compatibility checksum is calculated based on all configurations affecting the compilation result.

ACTION: If you want to apply the current analyzer settings to your design, recompile your design, and then run the Signal Tap Logic Analyzer. Otherwise, restore the analyzer settings to be compatible with the last compilation result.