ID:14170 Can't remap PLL "<name>" using zero delay buffer mode for target device family because PLLs in target device using zero delay buffer mode requires a bidirectional I/O in the feedback path

CAUSE: The specified PLL was created for a device family that is different from the target device family and that uses zero delay buffer mode. Analysis & Synthesis cannot remap the PLL to a PLL for the target device family because the PLL using zero delay buffer mode in the target device requires a bidirectional I/O in the feedback path.

ACTION: Modify the PLL to not use zero delay buffer mode, or reinstantiate the specified PLL by reopening it in the ALTPLL Megawizard and saving it again as well as adding the necessary bidirectional I/O in the feedback path.