ID:14138 PLL "<name>" must contain <name> <signal or parameter>

CAUSE: The specified PLL does not contain the specified parameter or signal, but the parameter or signal is required. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .

ACTION: Locate the source of the message to determine which megafunction parameter is causing the error and specify the required signal or parameter for the PLL in the design file. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager to specify legal ports and parameters for megafunctions.