ID:14258 WYSIWYG primitive "<name>" must use regcascin port when in register cascade mode

CAUSE: The specified WYSIWYG primitive is in register cascade mode (that is, the REGISTER_CASCADE_MODE parameter is set to ON), but does not use the regcascin port. The regcascin port must be used in register cascade mode. Either the regcascin port must be used, or the REGISTER_CASCADE_MODE parameter must be set to OFF.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.