ID:14103 WYSIWYG primitive "<name>" cannot have RAM_BLOCK_TYPE parameter set to <name> when in <name> operation mode

CAUSE: The specified WYSIWYG primitive has the RAM_BLOCK_TYPE parameter set to M512, but is in bidirectional dual-port mode (that is, it has the OPERATION_MODE parameter set to BIDIR_DUAL_PORT). M512 memory blocks do not support BIDIR_DUAL_PORT mode. Either the RAM_BLOCK_TYPE parameter must be set to M4K or MRAM, or the OPERATION_MODE parameter must be set to a value other than BIDIR_DUAL_PORT.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at