ID:14077 WYSIWYG primitive "<name>" uses fpin fast input port that does not feed register port -- it must feed register port. In addition, WYSIWYG primitive must not use pterm5 and pxor ports, and, if PEXP_MODE parameter is set to OFF, it must not use the pterm0 - pterm4 ports.

CAUSE: The specified WYSIWYG primitive uses a fpin fast input port, but the fpin port is not connected to the register port of another WYSIWYG primitive. The WYSIWYG primitive may also be using a pterm5 or pxor port, which are not supported, or may be in non-parallel expander mode (that is, it may have the PEXP_MODE parameter set to OFF) but is using pterm (pterm0pterm4) ports. The fpin input port must feed the register port of another WYSIWYG primitive. In addition, the pterm or pxor ports must not be used, and either the PEXP_MODE parameter must be set to ON, or the pterm (pterm0pterm4) ports must not be used.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance, contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.