ID:95008 In altsyncram megafunction, clocken3 port can only be used when clock1 port is used

CAUSE: You connected the clocken3 port of the altsyncram megafunction; however, the clocken3 port can only be used when the clock1 port is connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .

ACTION: Modify the design and connect clock1 port of the altsyncram megafunction, or disconnect the clocken1 port. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.