ID:16538 Cannot use READ_DURING_WRITE_MODE_PORT_B parameter value set to <name> for device family <family_name> in altera_syncram megafunction

CAUSE: You specified the READ_DURING_WRITE_MODE_PORT_B parameter of the altera_syncram megafunction; however, the READ_DURING_WRITE_MODE_PORT_B parameter value set cannot be used for the specified device family. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the IP Parameter Editor.

ACTION: Modify the design and set the READ_DURING_WRITE_MODE_PORT_B parameter value to a valid value. To avoid receiving this message in the future, Intel recommends using the IP Parameter Editor.