Input Ports

Port Name

Required

Description

Comments

data

Yes

Data input to the memory.

Input port WIDTH wide.

rdaddress[]

Yes

Read address input to the memory.

Input port WIDTHAD wide.

rdaddressstall[]

No

Read address stall input port. The rdaddress port must be registered.

For Stratix® III and Stratix® IV devices, the USE_EAB parameter value must be "ON" and the RAM_BLOCK_TYPE parameter value must be "MLAB(LUTRAM)". For other device families, the value must be "GND".

wraddress[]

Yes

Write address input to the memory.

Input port WIDTHAD wide.

wraddressstall[]

No

Write address stall input port. The wraddress port must be registered.

For Stratix® III and Stratix® IV devices, the USE_EAB parameter value must be "ON" and the RAM_BLOCK_TYPE parameter value must be "MLAB(LUTRAM)". For other device families, the value must be "GND".

byteena

No

Byte enable input port.

Input port[WIDTH_BYTEENA - 1..0] wide.

For Stratix® IV, the USE_EAB parameter value must be "ON", the RAM_BLOCK_TYPE parameter value must be "MLAB(LUTRAM)", and the WIDTH parameter must be a non-unary multiple of the BYTE_SIZE parameter. For other device families, the value must be "VCC".

wren

Yes

Write enable input port.

 

inclock

No

Positive-edge-triggered input clock port.

Used for registered write ports, for example, data, wraddress, and wren. Can also be used for registered read ports, for example, rdaddress and rden.

inclocken

No

Clock enable port for inclock.

 

rden

No

Read enable input. Disables reading when low (0).

 

outclock

No

Positive-edge-triggered input clock port.

Used for the registered q[] port. Can also be used for registered read ports, for example, rdaddress and rden.

outclocken

No

Clock enable port for outclock.

 

aclr

No

Asynchronous clear input.

Affects registered inputs and outputs.