Output Ports
Port Name |
Required |
Description |
Comments |
|---|---|---|---|
cal_shift_busy |
Yes |
Specifies whether configuration or shifting is busy. |
Output port [OCT_BLOCK_NUMBER - 1..0] wide. |
calibration_busy |
Yes |
Specifies that calibration is busy. |
Output port [OCT_BLOCK_NUMBER - 1..0] wide. |
calibration_done |
No |
Specifies that calibration is complete. |
Output port [OCT_BLOCK_NUMBER - 1..0] wide. |
parallelterminationcontrol |
No |
Specifies parallel termination. |
Receives the current state of the pullup and pulldown transmitter control buses from a termination logic block. Output port [OCT_BLOCK_NUMBER * 14-1..0] wide. |
seriesterminationcontrol |
No |
Specifies the serial termination. |
Receives the current state of the pullup and pulldown receiver control buses from a termination logic block. Output port [OCT_BLOCK_NUMBER * 14-1..0] wide. |
termination_control |
Yes |
Controls the termination. |
Specifies the termination type. Output port [OCT_BLOCK_NUMBER * 1..0] wide. |
shift_busy |
No |
Stays high when the shift_only_request port is in processing. |
Output port [OCT_BLOCK_NUMBER - 1..0] wide. |