About Using the Synplify Software with the Quartus® Prime Software

You can use the Synopsys® Synplify design entry/synthesis tool to create, synthesize, and optimize a project and then generate a Verilog Quartus Mapping File (.vqm) Definition for compilation in the Quartus® Prime software. The following topics describe the typical flow with the Synplify software and the Quartus® Prime software:

  1. Set up the Synplify working environment
  2. Create a design for use with the Synplify software
  3. Set up a project with the Synplify software
  4. Assign design constraints with the Synplify software
  5. Generate Verilog Quartus Mapping Files with the Synplify software
  6. Analyze design results with the Synplify software

You can use Altera-provided Altera® IP in the Synplify software by using the IP Catalog to create custom Altera® IP variations that are based on Altera-provided Altera® IP. Refer to the following topics for information on how to use specific Altera® IP:

  • Creating and Instantiating a VHDL Function for Use with the Synplify Software
  • Creating and Instantiating a Verilog HDL Function for Use with the Synplify Software

You can use the same procedures and principles with similar Altera® IP in other designs.

Note: For more information about the Synplify software, refer to the Training page of the Altera website.
Note: More information about other EDA design entry/synthesis tools is available on the Altera website.