report_advanced_io_timing (::quartus::sta)

The following table displays information for the report_advanced_io_timing Tcl command:

Tcl Package and Version

Belongs to ::quartus::sta 1.0

Syntax report_advanced_io_timing [-h | -help] [-long_help] [-append] [-file <name> ] [-panel_name <name> ] [-stdout]
Arguments -h | -help Short help
-long_help Long help with examples and possible return values
-append If output is sent to a file, this option appends the result to that file. Otherwise, the file will be overwritten. This option is not supported for HTML files.
-file <name> Sends the results to an ASCII or HTML file. Depending on the extension
-panel_name <name> Sends the results to the panel and specifies the name of the new panel
-stdout Send output to stdout, via messages. You only need to use this option if you have selected another output format, such as a file, and would also like to receive messages.
This command creates a report containing all of the relevant signal
integrity measurements computed during I/O buffer simulation.

You must perform delay annotation with Advanced I/O Timing enabled
before using this command. This option can be enabled from the
Timing Analyzer Page of the Settings dialog box.
Example Usage
project_open my_project

# Always create the netlist first
read_sdc my_project.sdc

# Create "Advanced I/O Timing" report panel
report_advanced_io_timing -panel_name "Advanced I/O Timing"

# The following command is optional

Return Value Code Name Code String Return
TCL_OK 0 INFO: Operation successful
TCL_ERROR 1 ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist.