ID:215030 No power estimate was produced. Power Analyzer has no power model for the target device family. Use the Early Power Estimator spreadsheet instead.
CAUSE: You requested a power estimate. However, the Power Analyzer has no power model for the target device family. No power estimate was produced for the current design.
ACTION: You can perform the following:
- Use the --estimate_power=off command-line option to stop this message.
- Use the Early Power Estimator spreadsheet to estimate power for the current design.
- Use the Power Analyzer to write a design summary file to be imported by the Early Power Estimator.
- Run quartus_pow with the --output_epe command-line option tocreate the design summary file from the command line. Alternately, use the Generate Early PowerEstimator File option on the Project menu.