ID:176030 Memory block type <type> does not support parameter <name>

CAUSE: You manually edited a design file for the specified memory block type to include the specified parameter. However, the memory block type does not support the parameter.

ACTION: Delete the unsupported parameter from the design file for the memory block. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager to edit a megafunction, rather than manually editing the design files for the megafunction. If you are using an EDA tool, contact the technical support for the EDA tool vendor. Otherwise, for further assistance contact Intel Technical Services at http://mysupport.altera.com.