create_timing_summary (::quartus::sta)
The following table displays information for the create_timing_summary Tcl command:
Tcl Package and Version |
Belongs to ::quartus::sta 1.0 |
|||
Syntax | create_timing_summary [-h | -help] [-long_help] [-append] [-file <name> ] [-hold] [-mpw] [-panel_name <name> ] [-recovery] [-removal] [-setup] [-split_by_corner] [-stdout] | |||
Arguments | -h | -help | Short help | ||
-long_help | Long help with examples and possible return values | |||
-append | If output is sent to a file, this option appends the result to that file. Otherwise, the file will be overwritten. This option is not supported for HTML files. | |||
-file <name> | Sends the results to an ASCII or HTML file. Depending on the extension | |||
-hold | Hold Analysis | |||
-mpw | Minimum Pulse Width Analysis | |||
-panel_name <name> | Sends the results to the panel and specifies the name of the new panel | |||
-recovery | Recovery Analysis | |||
-removal | Removal Analysis | |||
-setup | Setup Analysis (Default) | |||
-split_by_corner | When set, running this command with the -panel option will create a folder containing versions of this report for selected multiple operating conditions. This option has no effect when used with the -stdout or -file options. | |||
-stdout | Send output to stdout, via messages. You only need to use this option if you have selected another output format, such as a file, and would also like to receive messages. | |||
Description |
Reports the worst-case Clock Setup and Clock Hold slacks and endpoint TNS (total negative slack) per clock domain. Total negative slack is the sum of all slacks less than zero for either destination registers or ports in the clock domain. This command shows the worst-case slack for each clock domain. You right click in these reports to run more detailed reports like Histograms and Report Timing. By default, this command creates a Setup Summary. This command can also generate a Hold Summary (-hold), Recovery Summary (-recovery), Removal Summary (-removal), or Minimum Pulse Width Summary (-mpw). The report can be directed to the Tcl console (-stdout, default), a file (-file), the Timing Analyzer graphical interface (-panel_name), or any combination of the three. |
|||
Example Usage |
project_open my_project # Always create the netlist first and process constraints create_timing_netlist read_sdc my_project.sdc update_timing_netlist # Create Clock Domain Summary create_timing_summary -panel_name "Setup Summary" create_timing_summary -hold -panel_name "Hold Summary" # The following command is optional delete_timing_netlist project_close |
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: Panel name cannot contain repeated pipe characters. (||). | ||
TCL_ERROR | 1 | ERROR: Option <string> has illegal value: <string>. Specify a legal option value. | ||
TCL_ERROR | 1 | ERROR: Timing netlist does not exist. Use create_timing_netlist to create a timing netlist. | ||
TCL_ERROR | 1 | ERROR: Report database is not open |