read_netlist (::quartus::chip_planner)
The following table displays information for the read_netlist Tcl command:
Tcl Package and Version |
Belongs to ::quartus::chip_planner 2.0 |
|||
Syntax | read_netlist [-h | -help] [-long_help] [-force_post <pass|fail> ] | |||
Arguments | -h | -help | Short help | ||
-long_help | Long help with examples and possible return values | |||
-force_post <pass|fail> | Force cleanup procedures to run after a fit if -force was used | |||
Description |
Reads the Chip Planner netlist from the last compilation. You must open a project before using this command. |
|||
Example Usage |
read_netlist |
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful | ||
TCL_ERROR | 1 | ERROR: Unable to create Chip Planner netlist. Current device family does not support the Chip Planner. Specify another device family and recompile the design. | ||
TCL_ERROR | 1 | ERROR: Chip Planner (::quartus::chip_planner) is not available from the Quartus Prime Tcl Console. Run the quartus_cdb executable with commands from the ::quartus::chip_planner package from a system command prompt. | ||
TCL_ERROR | 1 | ERROR: Chip Planner is unavailable with the current license. Refer to the Licensing section of the Intel website to obtain a valid Quartus Prime license file. | ||
TCL_ERROR | 1 | ERROR: Unable to find an active revision. Make sure there is an open, active revision. | ||
TCL_ERROR | 1 | ERROR: No open project. Open an existing project or create a new project. | ||
TCL_ERROR | 1 | ERROR: Before running Chip Planner, run Analysis and Synthesis (quartus_map) for read-only use and quartus_fit to enable writable ECO changes. |