ID:209010 Device did not accept configuration data (after <number> bits sent)
CAUSE: You directed the Programmer to configure a device with the ByteBlasterMV communications cable, but the device did not accept the data from the programmer. This problem can be caused by:
- Incorrect device selected
- User start up clock selected but no running clock connected to CLK_USR pin
- Communications cables not securely connected
- No power to target system
ACTION: Make sure all cables are securely connected, select a different device, check the power on the target system.Make sure you have connected a start-up clock for initialization of the CLKUSR pin, or specify that the device not use a user-supplied clock on the CLKUSR pin for initialization.