ID:176043 Memory block size configuration of <number> by <number> for byte enable port does not support port <name>

CAUSE: You manually edited a design file and specified a memory block size configuration for the byte enable port. However, the Fitter cannot support the port in the specified memory block size configuration.

ACTION: Change the memory block size configuration to support the port or disconnect the port. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager to edit a RAM megafunction, rather than manually editing the design file for the megafunction. If you are using an EDA tool, contact the technical support for the EDA tool vendor. Otherwise, for further assistance contact Intel Technical Services at http://mysupport.altera.com.