ID:176037 Data port <name> width exceeds memory block type <type> limit of <number> bits

CAUSE: You manually edited a design file and assigned a data width to the specified port. However, the Fitter cannot place the memory block you specified because the data width of the specified port exceeds the limit for the specified block type.

ACTION: Reduce the data width to fit the limit for the current memory block type or change the memory block type to one that can support the specified data width. To avoid receiving this message in the future, Intel recommends using only the MegaWizard Plug-In Manager to edit a RAM megafunction, rather than manually editing the design file for the megafunction.