ID:15379 Port <name> of DSP block output WYSIWYG primitive "<name>" is not connected to a DSP block multiplier WYSIWYG primitive -- port <name> must be connected when OPERATION_MODE is set to <name>

CAUSE: The specified port of the specified DSP block output WYSIWYG primitive is not connected to a DSP block multiplier WYSIWYG primitive, but must be connected to a DSP block primitive WYSIWYG primitive when the OPERATION_MODE is set to the specified value.

ACTION: If you are using an EDA tool, contact the technical support for the EDA tool regarding this message. For further assistance contact Intel Technical Support by creating a Service Request at www.altera.com/mysupport.