ID:95015 Must connect <name> port of altsyncram megafunction when using current set of parameters

CAUSE: You did not specify the specified port of the altsyncram megafunction; however, when you use the current set of parameters, the specified port must be connected. This error usually occurs when you instantiate a megafunction directly in a text file rather than using the MegaWizard Plug-In Manager .

ACTION: Modify the design and connect specified port of the altsyncram megafunction, or change the parameters so that they do not require the specified port. To avoid receiving this message in the future, Intel recommends using the MegaWizard Plug-In Manager.