ID:210003 JEDEC STAPL Format File, Jam STAPL Byte Code 2.0 File, SRAM Object File, or Programmer Object File contains cyclic redundancy check code <number> that does not match expected CRC code <number>. Do you want to ignore CRC code and add file to JTAG chain?

CAUSE: You tried to add a JEDEC STAPL Format File (.jam), Jam STAPL Byte Code 2.0 File (.jbc), SRAM Object File (.sof), or Programmer Object File (.pof) to a JTAG chain in the Programmer window. However, the Quartus Prime software cannot add the file to a JTAG chain because the file contains a cyclic redundancy check (CRC) code that does not match the expected CRC code. The Quartus Prime software is asking whether you want to ignore the CRC code and add the file to the JTAG chain.

ACTION: Click Yes to continue with the operation, or click No to cancel the operation. If you continue, the Quartus Prime software will ignore the CRC code in the Jam File, JBC File, SOF, or POF. If you cancel, you can either recreate the Jam File or JBC File or open the Jam File or JBC File in the Quartus Prime Text Editor and add the correct CRC code as displayed in the message text. You can recreate the SOF or POF by performing another compilation.