ID:332195 Found minimum delays greater than maximum delays for <number> timing edges

CAUSE: The Quartus Prime software found minimum delays greater than maximum delays for the specified timing edges. This message might occur if the set_annotated_delay or the set_timing_derate Synopsys Design Constraints File (.sdc) commands were incorrectly used. If it occurred in the clock network and the common clock path pessimism (CCPP) removal is enabled, the CCPP will be reset to zero if the calculated CCPP is negative.

ACTION: Check your Synopsys Design Constraints File command to make sure that the set_annotated_delay and the set_timing_derate commands are correct.