ID:329003 Unable to simulate the I/O buffer for pin "<name>". The signal swing at the near-end or far-end of the board trace did not cross the VMEAS point for the I/O standard. The Quartus Prime software will use the default board trace model for the I/O buffer.

CAUSE: The Quartus Prime software is unable to simulate the I/O buffer for the specified pin because the signal swing at the near-end or far-end did not cross the V_MEAS point for the I/O standard. As a result, the Quartus Prime software will use the default board trace model for the I/O buffer.

ACTION: Specify a different board trace model for the specified pin.