ID:140019 LogicLock region "<name>" cannot have floating region because it is not supported -- the setting is ignored

CAUSE: The current device does not support floating LogicLock regions. You get this message either because the Quartus Prime Settings File (.qsf) of the current project specifies floating regions or you tried to create floating regions via the Quartus Prime software. In both cases, the floating settings are ignored.

ACTION: No action is required because the Quartus Prime software automatically ignores any unsupported LogicLock settings. If the settings originate from the Quartus Prime Settings File, you may want to remove the associated assignments to avoid seeing this message again.