ID:140018 LogicLock region "<name>" cannot be auto-sized because it is not supported -- the setting is ignored

CAUSE: The current device does not support auto-size LogicLock regions. You get this message either because the Quartus Prime Settings File (.qsf) of the current project specifies auto-sized regions or you tried to create auto-sized regions via the Quartus Prime software. In both cases, the auto-size settings are ignored.

ACTION: No action is required because the Quartus Prime software automatically ignores any unsupported LogicLock settings. If the settings originate from the Quartus Prime Settings File, you may want to remove the associated assignments to avoid seeing this message again.