ID:140070 Can't specify the security level of LogicLock region "<name>" to be "<name>", either because you do not have the required license or the currently selected device family does not support specifying security level

CAUSE: You attempted to set the security level of the specified LogicLock region to a value that is not supported by either the current Quartus Prime software license, or the currently selected device family, or both. If you get this message while performing an operation through the GUI, the operation has been ignored. If you have ll_security_level assignments in the Quartus Prime Settings File (.qsf), the assignments are ignored.

ACTION: Make sure that you have the required license and that the currently selected device family supports the feature, and then retry the operation.