ID:176325 Port name <name> with index <number> of Clock Control Block <name> has a Global Signal option assignment of <name> from signal <name> that does not match Global Signal option assignment <name>

CAUSE: You assigned the Global Signal option for the specified port and index of the specified signal. However, the inputs to a Clock Control Block must use the same global signal type. As a result, the Fitter used the Global Signal option assignment for the lowest port index for all the inputs to that Clock Control Block.

ACTION: No action is required. To avoid receiving this message in the future, remove the Global Signal option assignment for the specified signal, or make sure all the inputs to a single Clock Control Block use the same global signal type.