ID:176113 Fast PLL <name> and fast PLL <name> are being used in different modes

CAUSE: The Fitter is reporting that the specified fast PLLs have different modes and hence, they cannot be merged.

ACTION: If you do not want to change the mode on any PLL and are fine with the PLLs not being merged, no action is required. To avoid receiving this message in the future, there are two options. The first option is to modify the design so that the two fast PLLs operate using the same mode. The second option is to use the assignment Ignore PLL Mode While Merging PLLs on at least one of two PLLs.