ID:308024 (High) <text>. Found <number> node(s) related to this rule.

CAUSE: In the current design, the Design Assistant found the specified number of nodes where combinational logic that is used as a reset signal is not synchronized; that is, the combinational logic does not drive a register before driving one or more input reset ports of other registers. However, combinational logic that is used as a reset signal should be synchronized because glitches in unsynchronized combinational logic can cause the unintentional resetting of the logic's destination register(s). The submessage(s) of this message list the node(s) that the Design Assistant found.

ACTION: Synchronize the combinational logic that is used as a reset signal.