ID:127011 Memory depth (<number>) in the design file differs from memory depth (<number>) in the Memory Initialization File "<name>" -- setting initial value for remaining addresses to never match

CAUSE: The memory depth value you specified in a design file (Block Design File (.bdf), Text Design File (.tdf), VHDL Design File (.vhd), Verilog Design File (.v), or EDIF Input File (.edf)) of a design does not match the specified memory depth value in the Memory Initialization File (.mif). This condition occurs when you specify a memory depth in the design file that is greater than the depth defined in the Memory Initialization File or the Hexadecimal (Intel-Format) File (.hex) . The Quartus Prime software is therefore setting the initial value for the remaining addresses to never match.

ACTION: If you do not want the initial values for the remaining addresses set to never match, make sure that the design file and the Memory Initialization contain the same memory depth values for the memory block.