ID:13003 DEV_CLRn pin will set, and not reset, register with preset signal due to NOT Gate Push-Back

CAUSE: You enabled the device-wide reset ( DEV_CLRn ) pin for the current design's target device. As a result, Analysis & Synthesis enabled the NOT Gate Push-Back on some registers in the current project. For devices that have the DEV_CLRn option, these registers will be set rather than reset when DEV_CLRn is enabled.

ACTION: No action is required. However, if you want the Quartus Prime software to be reset rather than set the registers with preset signals, turn off the NOT Gate Push-Back logic option for those registers.