ID:287034 Pin "<name>" defined in Subdesign Section as input, machine input, or machine output pin cannot be defined in Register Declaration

CAUSE: In a Register Declaration in a Text Design File (.tdf), you defined the specified pin as a register. However, in the TDF's Subdesign Section, you defined the pin with the port type INPUT, MACHINE INPUT, or MACHINE OUTPUT. You can define only output or bidirectional pins (that is, pins you define with the port type OUTPUT or BIDIR in the Subdesign Section) as registers.

ACTION: Define the pin as an output or bidirectional pin in the Subdesign Section, or remove the Register Declaration where you define the pin as a register.